Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Camera on the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Video tutorial

This guide provides instructions for installing the rear camera on the Alfa Romeo Giulietta in simple steps. The compatible kit must be suitable for your vehicle; start by installing the central display and run the wiring to the rear hatch, routing it behind the plastic pillars.

At this point, install the rear camera, adjusting the angle correctly; check the operation of the reversing camera to make any necessary adjustments, following the video tutorial to the end!


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Install a Rear Camera on the Alfa Romeo Giulietta
How to Install a Rear Camera on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video, see how to install a rear camera. The vehicle in question is an Alfa Romeo Giulietta, but the system applies to all cars. The camera s…
How to Install the Rear Dam on an Alfa Romeo Giulietta?
How to Install the Rear Dam on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To install the rear dam on the Alfa Romeo Giulietta, loosen the screws securing the bumper and remove it, disconnecting the connectors as well. Once …
How to Set the Time on an Alfa Romeo Giulietta
How to Set the Time on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…

    Frequently Asked Questions

    • Giulietta 2010-2020 - How many kilometers should the Alfa Romeo Giulietta be serviced? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos