Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Aprilia Shiver 750?

Model: Aprilia Shiver 750
Part: Brake pads

Video tutorial

In order to replace the front brake pads of the Aprilia Shiver 750, you need to loosen the screws that secure the front brake caliper to its housing: once the securing screws have been loosened, you can proceed by detaching the caliper and removing the pads after removing the pin that locks them.

At this point, you can insert the new pads inside the caliper, securing them with the appropriate pin: in this way, you can position the caliper on the disc so that it can be fastened with the screws and verify that everything works correctly.


Posted on 17 May 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Aprilia Shiver 750?
How to Replace the Rear Brake Pads on the Aprilia Shiver 750?
Shiver 750 You can replace the rear brake pads on the Aprilia Shiver 750 by removing the safety clip and unscrewing the pin that holds the pads in place. It is …
How to Replace the Rear Brake Pads on Aprilia Shiver 750
How to Replace the Rear Brake Pads on Aprilia Shiver 750
Shiver 750 To replace the rear brake pads on the Aprilia Shiver, loosen the nuts securing the pin at the back of the brake caliper. By loosening the nuts, you c…
Replacing the Rear Brake Pads on an Aprilia Shiver 750 (2008)
Replacing the Rear Brake Pads on an Aprilia Shiver 750 (2008)
Shiver 750 In today's tutorial video, you will learn how to remove and replace the rear brake pads on an Aprilia Shiver 750 from 2008. To begin, remove the pad …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos