|
Do it yourself
| |||
| ||||
|
Model: Aprilia Shiver 750
To replace the rear brake pads on the Aprilia Shiver, loosen the nuts securing the pin at the back of the brake caliper. By loosening the nuts, you can remove the pin from its holes, allowing the pads to be extracted without issues. Once the old pads have been removed, insert the new replacement parts into their housing in the caliper. Finally, reinsert the pin into the appropriate holes, securing it with the nuts that were removed.
Updated on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Shiver 750
In order to replace the front brake pads of the Aprilia Shiver 750, you need to loosen the screws that secure the front brake caliper to its housing:…
Shiver 750
You can replace the rear brake pads on the Aprilia Shiver 750 by removing the safety clip and unscrewing the pin that holds the pads in place. It is …
Shiver 750
In today's tutorial video, you will learn how to remove and replace the rear brake pads on an Aprilia Shiver 750 from 2008. To begin, remove the pad …
|
How to Replace the Clutch on a Triumph Speed Triple?
To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
