Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on an Aprilia Shiver 750 (2008)

Model: Aprilia Shiver 750
Part: Brake pads

Video tutorial

In today's tutorial video, you will learn how to remove and replace the rear brake pads on an Aprilia Shiver 750 from 2008. To begin, remove the pad retaining clip by unscrewing the socket screw found on the back of the caliper; this will allow you to extract the central pin, enabling you to subsequently remove the pads, as shown in the video.

At this point, clean any carbon residue present on the caliper before installing the new pads; simply reassemble everything by applying the reverse procedure of disassembly!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Aprilia Shiver 750?
How to Replace the Rear Brake Pads on the Aprilia Shiver 750?
Shiver 750 You can replace the rear brake pads on the Aprilia Shiver 750 by removing the safety clip and unscrewing the pin that holds the pads in place. It is …
How do you replace the front brake pads of the Aprilia Shiver 750?
How do you replace the front brake pads of the Aprilia Shiver 750?
Shiver 750 In order to replace the front brake pads of the Aprilia Shiver 750, you need to loosen the screws that secure the front brake caliper to its housing:…
How to Replace the Rear Brake Pads on Aprilia Shiver 750
How to Replace the Rear Brake Pads on Aprilia Shiver 750
Shiver 750 To replace the rear brake pads on the Aprilia Shiver, loosen the nuts securing the pin at the back of the brake caliper. By loosening the nuts, you c…

How to Replace the Rear-View Mirror on a Piaggio Vespa 125 Primavera?

To replace the rear-view mirror on a Piaggio Vespa 125 Primavera, lift the rubber cover at the base of the mirror. Underneath, you will find the nut that needs to be loosened to free the mirror from its position. This should then be turned counterclockwise to remove it completely. The new mirror can then be inserted and tightened by turning it clockwise. Finally, secure it with the corresponding nut and reposition the rubber cover at the base of its housing.

Watch the video!


by ScegliAuto

More videos