Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the rear brake pads on the Aprilia Shiver 750 by removing the safety clip and unscrewing the pin that holds the pads in place. It is important to use a screwdriver to leverage between the disc and the old pad: this allows the caliper piston to retract completely without risking damage to the disc. Once the worn pads are removed, position the new ones in the housing, reinsert the fixing pin, and tighten it. The operation concludes with a crucial check of the brake fluid level in the reservoir.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on an Aprilia Shiver 750 (2008)
Replacing the Rear Brake Pads on an Aprilia Shiver 750 (2008)
Shiver 750 In today's tutorial video, you will learn how to remove and replace the rear brake pads on an Aprilia Shiver 750 from 2008. To begin, remove the pad …
How do you replace the front brake pads of the Aprilia Shiver 750?
How do you replace the front brake pads of the Aprilia Shiver 750?
Shiver 750 In order to replace the front brake pads of the Aprilia Shiver 750, you need to loosen the screws that secure the front brake caliper to its housing:…
How to Replace the Rear Brake Pads on Aprilia Shiver 750
How to Replace the Rear Brake Pads on Aprilia Shiver 750
Shiver 750 To replace the rear brake pads on the Aprilia Shiver, loosen the nuts securing the pin at the back of the brake caliper. By loosening the nuts, you c…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos