Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Valve

To remove the rave valve from the Aprilia Rs 125, you need to remove the Allen bolt from the tank and lift it, being careful with the fuel line. Then, disconnect the bolts on the battery using an 8 mm spanner and remove the battery itself. Also, remove the bolts from the expansion tank and slide it off its pins. Below this, you will find the valve, which requires the removal of two 6 mm Allen bolts to be taken out. Detach the valve by pushing down the valve guide so that it can disconnect from the cable it is attached to.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Fluid on Aprilia RS 125
Replacing Brake Fluid on Aprilia RS 125
Rs 125 As always, secure your Aprilia RS 125 in a stable and safe position to work on it, ensuring the operator's safety as much as possible. It is advisabl…
How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 The disassembly operation of the Aprilia RS 125 engine block is carried out by loosening the screws that fix it to its housing, then disconnecting al…
How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 In order to disassemble the engine of the Aprilia RS 125, you need to loosen the screws that fix the engine block to its housing, so that it is possi…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos