|
Do it yourself
| |||
| ||||
Model: Aprilia Shiver
To replace the battery in an Aprilia Shiver, access the underside of the seat by unscrewing the screws that secure it on the sides. Once these screws are loosened and the seat is removed, you will be able to access the components underneath. Here you will find the battery, which needs to be disconnected from the appropriate power cables and its securing bolts so that it can be extracted from its housing. At this point, connect the new battery, secure it, and close the housing by reinstalling the seat.
Updated on 15 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Shiver
To reset the service light on an Aprilia Shiver, use the lever on the left side of the handlebars to enter the menu displayed on the screen. Select t…
Shiver
It is advisable to perform this operation with the engine slightly warm. Start by placing your Aprilia Shiver on a motorcycle stand. Next, unscrew th…
Shiver
To replace the lambda sensor on an Aprilia Shiver, first disconnect the connector related to it, which is located on the right side of the bike. Once…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
