Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Light Reset on an Aprilia Shiver

Model: Aprilia Shiver
Part: Checks and maintenance

Video tutorial

To reset the service light on an Aprilia Shiver, use the lever on the left side of the handlebars to enter the menu displayed on the screen. Select the "diagnostics" option (selection is made by pressing the lever) and enter the required code, which in this case is 98789. This allows you to access the service menu, where you must select "reset service intervals" and finally confirm that you want to reset the service.

By doing this, you have completed the entire procedure, and the service light on your Aprilia Shiver is finally reset!


Posted on 16 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on an Aprilia Shiver
How to Change the Engine Oil on an Aprilia Shiver
Shiver It is advisable to perform this operation with the engine slightly warm. Start by placing your Aprilia Shiver on a motorcycle stand. Next, unscrew th…
How to change the engine oil on an Aprilia Shiver?
How to change the engine oil on an Aprilia Shiver?
Shiver To change the engine oil on an Aprilia Shiver, unscrew the oil drain plug located on the lower side of the bike so that all the used oil can drain ou…
How to Replace the Battery in an Aprilia Shiver
How to Replace the Battery in an Aprilia Shiver
Shiver To replace the battery in an Aprilia Shiver, access the underside of the seat by unscrewing the screws that secure it on the sides. Once these screws…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos