Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the lambda sensor on an Aprilia Shiver, first disconnect the connector related to it, which is located on the right side of the bike. Once the connector is removed, use a 22mm spanner to loosen the bolt that secures the sensor to the exhaust. The sensor can now be removed from its housing and replaced with a new spare part; after replacement, secure the sensor with the same spanner and reconnect the previously disconnected connector, ensuring everything functions correctly.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Service Light Reset on an Aprilia Shiver
Service Light Reset on an Aprilia Shiver
Shiver To reset the service light on an Aprilia Shiver, use the lever on the left side of the handlebars to enter the menu displayed on the screen. Select t…
How to Change the Engine Oil on an Aprilia Shiver
How to Change the Engine Oil on an Aprilia Shiver
Shiver It is advisable to perform this operation with the engine slightly warm. Start by placing your Aprilia Shiver on a motorcycle stand. Next, unscrew th…
How to Replace the Air Filter on an Aprilia Shiver
Shiver To replace the air filter on an Aprilia Shiver, you need to loosen the screws that secure the seat to its housing, completely removing it to access t…

How to Remove the Belt and Variator from the Aprilia SR MAX

In this brief and simple guide, follow the instructions to remove and replace the drive belt and variator of the Aprilia SR MAX scooter. First, place the scooter on its centre stand and start unscrewing the screws of the transmission cover to remove it. Next, unscrew the central nut of the fan and clutch bell to take them off, as shown in the video. Now, remove the drive belt and variator, replacing the rollers if necessary; then refit all the transmission components.

Watch the video!


by ScegliAuto

More videos