Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Shiver
Part: Engine oil

Today, let's look at the guide that will allow you to perform the routine maintenance service, replacing the engine oil and oil filter on the Aprilia Shiver motorcycle. First, place the bike on its stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes, as shown in the video. Then, unscrew the oil filter cartridge located behind the exhaust manifold. At this point, screw in and gently tighten the new oil filter, and then top up the oil!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Service Light Reset on an Aprilia Shiver
Service Light Reset on an Aprilia Shiver
Shiver To reset the service light on an Aprilia Shiver, use the lever on the left side of the handlebars to enter the menu displayed on the screen. Select t…
How to Change the Engine Oil on an Aprilia Shiver
How to Change the Engine Oil on an Aprilia Shiver
Shiver It is advisable to perform this operation with the engine slightly warm. Start by placing your Aprilia Shiver on a motorcycle stand. Next, unscrew th…
How to change the engine oil on an Aprilia Shiver?
How to change the engine oil on an Aprilia Shiver?
Shiver To change the engine oil on an Aprilia Shiver, unscrew the oil drain plug located on the lower side of the bike so that all the used oil can drain ou…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos