Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Aprilia Scarabeo 125

Model: Aprilia Scarabeo 125
Part: Service warning light

Video tutorial

If the service light on your Aprilia Scarabeo 125 comes on despite having already performed the service, you need to follow this manual reset procedure. First, place your bike on the stand and turn it off. Immediately after, turn on the ignition and press and hold the "Mode" button (located in the lower area of the right control) for about 10 seconds.

Finally, release the button and turn off the ignition. The reset is now complete, and from the next start, the service light will no longer illuminate.

If you encounter errors during the procedure, you can repeat it without any issues.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on an Aprilia Scarabeo 125 Scooter
How to Replace the Rear Light Bulbs on an Aprilia Scarabeo 125 Scooter
Scarabeo 125 In this tutorial, you will see how to replace the rear light bulbs on an Aprilia Scarabeo 125 scooter, a very simple and quick operation. To do this,…
How to Set the Time on the Aprilia Scarabeo
How to Set the Time on the Aprilia Scarabeo
Scarabeo 125 If the small display on your Aprilia Scarabeo shows the wrong time and you are wondering how to change it manually, read the following guide carefull…
How to Replace the Starter Motor on an Aprilia Scarabeo
How to Replace the Starter Motor on an Aprilia Scarabeo
Scarabeo 125 To replace the starter motor on an Aprilia Scarabeo, loosen the screws that secure the motor to its housing: this will be accessible from the left si…

How to replace the exhaust on a BMW S 1000 RR?

To replace the exhaust on a BMW S 1000 RR, loosen the bolts that secure the silencer to its housing, located on the right side of the vehicle near the mudguard. Once the mounting bolts are loosened and the clamp connecting the exhaust to the collector has been widened, you can remove the old exhaust. The new one can then be inserted into its place, allowing you to secure it to the corresponding mounts and subsequently connect it to the collector; at this point, check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos