Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Aprilia Scarabeo

Model: Aprilia Scarabeo 125
Part: Clock

Video tutorial

If the small display on your Aprilia Scarabeo shows the wrong time and you are wondering how to change it manually, read the following guide carefully and put the instructions into practice. First, switch on the ignition and then turn the left knob.

At the same time, press and hold the button located on the dashboard and proceed to change the hour digits. To switch to minutes, repeat the same procedure but turn the right knob.

Finally, hold the same button to save the changes made.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on an Aprilia Scarabeo
How to Replace the Starter Motor on an Aprilia Scarabeo
Scarabeo 125 To replace the starter motor on an Aprilia Scarabeo, loosen the screws that secure the motor to its housing: this will be accessible from the left si…
How to Replace the Front Indicator Bulb on an Aprilia Scarabeo
How to Replace the Front Indicator Bulb on an Aprilia Scarabeo
Scarabeo 125 To replace the indicator bulb on your Aprilia Scarabeo, loosen the screws securing the front fairing of the bike: these are located just below the ha…
How to reset the service light on the Aprilia Scarabeo 125
How to reset the service light on the Aprilia Scarabeo 125
Scarabeo 125 If the service light on your Aprilia Scarabeo 125 comes on despite having already performed the service, you need to follow this manual reset procedu…

How to Replace the Rear Brake Pads of the BMW R 1200 GS?

To replace the rear brake pads of the BMW R 1200 GS, loosen the screws and remove the pins that secure the brake caliper to the corresponding rear disc: once the caliper is detached, you can slide out the old pads from inside so that you can insert the new ones. These must be secured in their place using the appropriate pins: this way, you can reposition the caliper onto the disc and insert the appropriate securing screws to ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos