Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on an Aprilia Scarabeo

Model: Aprilia Scarabeo 125
Part: Starter motor

Video tutorial

To replace the starter motor on an Aprilia Scarabeo, loosen the screws that secure the motor to its housing: this will be accessible from the left side of the bike, near the start of the exhaust. The motor can be released by disconnecting the connectors that allow it to function.

After removing the old motor, insert the new one, securing it to its housing with the corresponding screws and reconnecting the cables; then check that it operates correctly.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulb on an Aprilia Scarabeo
How to Replace the Front Indicator Bulb on an Aprilia Scarabeo
Scarabeo 125 To replace the indicator bulb on your Aprilia Scarabeo, loosen the screws securing the front fairing of the bike: these are located just below the ha…
How to Set the Time on the Aprilia Scarabeo
How to Set the Time on the Aprilia Scarabeo
Scarabeo 125 If the small display on your Aprilia Scarabeo shows the wrong time and you are wondering how to change it manually, read the following guide carefull…
How to Replace the Rear Light Bulbs on an Aprilia Scarabeo 125 Scooter
How to Replace the Rear Light Bulbs on an Aprilia Scarabeo 125 Scooter
Scarabeo 125 In this tutorial, you will see how to replace the rear light bulbs on an Aprilia Scarabeo 125 scooter, a very simple and quick operation. To do this,…

How to Replace the Chain and Sprocket on a Gilera Smt 50

Today, we will discover the main steps to remove and replace the drive chain and sprocket on the Gilera Smt 50. First, place the motorcycle on a stand and begin by removing the rear wheel, disconnecting the drive chain and unscrewing the central axle of the wheel; then unscrew the screws of the sprocket fixed to the rim to remove it and replace it with the new one (having the same tooth count), as shown in the video. At this point, install the new drive chain and the wheel, finally adjusting the chain as per the instructions.

Watch the video!


by ScegliAuto

More videos