|
Do it yourself
| |||
| ||||
How to Replace the Front Indicator Bulb on an Aprilia Scarabeo
Model: Aprilia Scarabeo 125
Video tutorial
To replace the indicator bulb on your Aprilia Scarabeo, loosen the screws securing the front fairing of the bike: these are located just below the handlebars and at the front wheel arch. Once all the screws are loosened, remove the front panel to access the side light of the indicator. Disconnect the connectors, then extract the bulb inside and replace it with a new one. Finally, refit the front fairing.
Updated on 10 July 2026 by ScegliAuto
Related tutorials
Scarabeo 125
In this tutorial, you will see how to replace the rear light bulbs on an Aprilia Scarabeo 125 scooter, a very simple and quick operation. To do this,…
Scarabeo 125
To replace the starter motor on an Aprilia Scarabeo, loosen the screws that secure the motor to its housing: this will be accessible from the left si…
Scarabeo 125
If the small display on your Aprilia Scarabeo shows the wrong time and you are wondering how to change it manually, read the following guide carefull…
|
How to Replace the Coolant in the KTM XC 300
Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
