Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on the Aprilia RSV4 1000?

Model: Aprilia Rsv4 1000
Part: Engine oil

Video tutorial

To change the engine oil on the Aprilia RSV4 1000, loosen the screws securing the panel located at the bottom of the bike, also removing the one on the right side. Once these two panels are removed, you can unscrew the oil drain plug and collect all the used oil in a suitably positioned container.

After the oil has drained out, unscrew the oil filter located in the same area, replacing it with a new one; finally, top up through the designated hole on the right side of the bike.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Aprilia RSV4 1000
How to Change the Engine Oil on the Aprilia RSV4 1000
Rsv4 1000 This guide explains how to replace the engine oil and oil filter during the regular maintenance service on the Aprilia RSV4 1000. First, remove the l…
How to Change the Engine Oil of an Aprilia RSV4?
How to Change the Engine Oil of an Aprilia RSV4?
Rsv4 1000 To replace the engine oil of an Aprilia RSV4, start by placing the bike on a level surface. Next, use the centre stand to lift the bike. Remove the o…
How to Replace the Engine Oil and Oil Filter on an Aprilia RSV4 1000
How to Replace the Engine Oil and Oil Filter on an Aprilia RSV4 1000
Rsv4 1000 Today, we will discover the instructions that will allow you to remove and replace the engine oil and oil filter on an Aprilia RSV4 1000 motorcycle. …

How to Replace the Fork on the GasGas TXT 125?

To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the sides of the central axle. Once the wheel is removed, you can loosen the screws that secure the fork from the top just below the steering: at this point, it will be possible to remove it completely so that you can insert the new one, securing it properly and checking its operation.

Watch the video!


by ScegliAuto

More videos