Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Horn on the Aprilia SR 125

Model: Aprilia Sr 125

Video tutorial

This guide shows you how to dismantle and replace the horn or acoustic warning device on the Aprilia SR 125 scooter, following the instructions below. First, place the scooter on the centre stand and begin to remove the inner and front plastic fairings by unscrewing all the fixing screws; this will allow access to the horn, as shown in the video.

At this point, unscrew the bracket screw and disconnect its electrical connector to remove it and replace it with the new one; refit and connect the new horn!


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Sr 125 In this tutorial, you can see how to replace the air filter on the Aprilia SR 125 scooter, a very simple and quick operation. First, wait for the eng…
Sr 125 Today's guide will show you the instructions to remove and replace the indicator bulbs on the Aprilia SR 125 scooter. First, place the scooter on its…
Sr 125 This guide will show you how to perform a complete service on the Aprilia SR 125 scooter. First, put it on the centre stand and start by loosening th…

How to replace the engine oil and oil filter on a Moto Guzzi V7 Stone

Let’s discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Moto Guzzi V7 Stone. First, place the motorcycle on its stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean or replace the metal oil filter as shown in the video. At this point, unscrew the oil filler cap and top up the oil; check the level from the side window!

Watch the video!


by ScegliAuto

More videos