Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in an Aprilia RSV4, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then remove the lower fairing and position a container underneath the bike. Next, locate the drain hole bolt, unscrew it with a 10mm hex key, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and pour in the new oil through the designated hole.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of an Aprilia RSV4?
How to change the motor oil of an Aprilia RSV4?
Rsv4 1000 To replace the motor oil of an Aprilia RSV4, start by placing the motorcycle on a leveled surface. Next, use the center stand to lift the motorcycle.…
How to Change the Engine Oil and Oil Filter on the Aprilia RSV4
How to Change the Engine Oil and Oil Filter on the Aprilia RSV4
Rsv4 1000 In this guide, you will learn how to replace the engine oil and oil filter, performing the routine maintenance service on the Aprilia RSV4, by follow…
How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
Rsv4 1000 In this guide, we will see the main instructions on how to perform the routine maintenance service, replacing the engine oil and oil filter, of the A…

How to Replace the Remote Battery on a Ducati Multistrada?

In this tutorial, you will learn how to replace the battery in the remote control of the Ducati Multistrada, a very simple and quick operation. You will need a replacement CR2032 battery and a small flathead screwdriver. First, grab the remote from the rear compartment, then push it down and unlock it. Next, remove the rubber cap using the screwdriver, take out the old battery, and insert the new one, ensuring the polarity is correct. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos