Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Set the time on the Audi A6 MK5.

Model: Audi A6 C8, MK 5 - Years 2018-2026
Part: Clock

After a power outage in the Audi A6, we may need to set the correct time on the onboard clock. To do this, sit in the driver's seat, turn on the instrumentation, press the Menu button, which is located on the central tunnel near the gear lever, to select the general menu on the display in the center of the dashboard. Press the button on the top left to select the clock page, use the scroll wheel to select the time, confirm, and the hour digits will be highlighted. Set the correct time and confirm. The minute digits will be highlighted, set them and confirm to finish.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on an Audi A6
How to Set the Time on an Audi A6
Audi A6 (2011-2018 / C7, MK 4) This guide shows you how to set the date and time on your Audi A6, following the instructions below. First, get in the vehicle and turn on the instru…
How to Set the Time on the Audi A6 C4
How to Set the Time on the Audi A6 C4
Audi A6 (1994-1997 / C4, MK 1) To change the time displayed on your Audi A6 C4 (1994-1997), follow this simple procedure that takes just a few seconds to complete correctly. First,…
How to Set the Time on an Audi A6
How to Set the Time on an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos