Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A1

Model: Audi A1 GB, MK 2 - Years 2018-2025
Part: Service warning light

The reset of the service light on the Audi A1 is a very simple operation that can be done independently, thanks to our video tutorial. To perform the reset, we first need to turn on the instrument panel and then connect the diagnostic computer to the vehicle through the OBD port. Using the diagnostic computer, we select the type of vehicle and the light we want to reset, and follow the instructions on the computer. When the light on the instrument panel turns off, we can disconnect the diagnostic computer and turn off the vehicle. After about 10 seconds, we turn on the vehicle again to check if the light has been reset.

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset Audi A1 service warning light
How to reset Audi A1 service warning light
Audi A1 (2010-2018 / MK 1, 8X) In today's video tutorial we will see how to reset the routine maintenance service light on an Audi A1. First, let's get inside the car and reset the…
How to reset the service reminder on the Audi A1
How to reset the service reminder on the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) The following steps will allow us to reset the service maintenance light of the Audi A1. First of all, we get into the car and start the instrument p…
How do you reset the Service light in the Audi A1?
How do you reset the Service light in the Audi A1?
Audi A1 (2018-2025 / GB, MK 2) Here is explained in this video, the do-it-yourself method to reset the Service light of your Audi A1. The meaning of this light is well known, it tu…

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos