Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Original Car Radio in a Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

How to install the original car radio in a Mitsubishi Colt? This video carefully shows how to disassemble and reassemble it. Unscrew the screws on the central dashboard using a screwdriver as shown in the video, then, using a plastic or metal lever, pry off the central trim of the dashboard.

Remove the frame from the dashboard, and take out the plastic glove compartment along with the trim.

Unscrew the retaining screws around the car radio, remove the stereo from the dashboard (disconnecting the various power cables). Finally, reassemble the car radio in the dashboard as it was disassembled earlier.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove and Refit the Original Stereo on a Mitsubishi Colt
How to Remove and Refit the Original Stereo on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Let's see how to remove and refit the original stereo on a Mitsubishi Colt. First, use a plastic lever to detach the plastics of the radio located un…
How to Remove the Original Radio from a Mitsubishi Colt
How to Remove the Original Radio from a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) How to remove the original radio from a Mitsubishi Colt? Carefully follow these steps to execute the removal: use the original or aftermarket metal k…
How to Replace the Standard Radio of a Mitsubishi Colt
How to Replace the Standard Radio of a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Below are the instructions that will allow you to remove and replace the standard radio of a Mitsubishi Colt in simple steps. First, get inside the v…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos