Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of brake pads on Audi A1

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Brake pads

In this very useful video guide today, we can see the entire step-by-step procedure for replacing the front brake pads on an Audi A1. We start the procedure by removing the front wheel of the car, then we remove the two rubber caps located on the back of the caliper and unscrew the two fixing screws behind them using a 7mm hex key. After that, we push back the brake piston and detach the caliper from the disc, then we retract the piston completely, remove the old pads, replace them with a new pair, and finally reassemble everything following the reverse procedure.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear brake pads on an Audi A1
How to replace the rear brake pads on an Audi A1
Audi A1 (2010-2018 / MK 1, 8X) In this video, we see how to replace the rear brake pads of an Audi A1 with a mechanical parking brake: first, we remove the rear wheels, simply unsc…
How to use the electronic handbrake
How to use the electronic handbrake
Audi A1 (2018-2025 / GB, MK 2) What the electronic handbrake does is imitate what the manual handbrake does, so if I want to install the electronic handbrake on a modern car, I jus…
How to start the engine of the Audi A1 1.4 TFSI
How to start the engine of the Audi A1 1.4 TFSI
Audi A1 (2010-2018 / MK 1, 8X) Following these brief and simple instructions, we will see how to proceed with starting the engine of the Audi A1 1.4 TFSI with manual transmission. …

Other guides you may be interested in

How to Remove the Headlight Bulb on a Honda Civic

Are the front headlight bulbs on your Honda Civic faulty? Follow this instructional video for the disassembly process. Open the bonnet of the engine compartment, remove the inspection caps from the headlights using a screwdriver, detach the bulb holders from the headlight, and disconnect the respective power connectors. Replace the damaged bulbs with new ones of the same size and voltage. After replacing the bulbs, reinstall the bulb holder in the headlight housing. Finally, close the rear of the headlights with the inspection caps. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos