Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
This video is currently unavailable

Today's information will illustrate the procedure for removing and replacing the front headlight of the Audi A3. First, open the bonnet and start unscrewing the fixing screws located at the top of the bumper; then unscrew the screws of the front wheel arch to gently detach the bumper on the sides, as shown in the video.

Now you can access the lower screws of the headlight, unscrewing all the screws of the optical unit to remove it; disconnect the electrical connector of the lights to replace the front headlight with the new one, reassembling everything!


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Audi A3
Replacing the Headlight Bulb of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Let’s discover the steps that will allow us to remove and replace the headlight bulb of the Audi A3. To access the headlight bulb, it will be necessa…
How to Replace the Headlamp on the Audi A3
How to Replace the Headlamp on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the headlamp on the Audi A3? To remove the front headlamp of the A3, you need to take off the front bumper. Use a screwdriver to u…
Replacing the Front Headlight Bulb of an Audi A3
Replacing the Front Headlight Bulb of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today's guide shows you how to remove and replace the front headlight bulb of an Audi A3, following the instructions below. First, open the bonnet of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos