Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Service warning light

The reset of the tire pressure warning light shown on the instrument panel of the Audi A3 is done by inflating the tires to the correct pressure value: this value will be indicated on the sticker attached to the driver's side door pillar. Once the inflation is done, you will need to navigate to the menu that appears on the screen in the center of the dashboard: you can select the option "Servicing & checks", then "Store tyre pressures". This way, the sensors will read the new pressure values, and if they are correct, the warning light will disappear.

Posted on 5 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on an Audi A3?
How to Reset the Tyre Pressure Warning Light on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To completely clear the tyre pressure warning light displayed on the instrument panel of the Audi A3, first activate the instrument panel. At this po…
Reset Tyre Pressure Light on Audi A3
Reset Tyre Pressure Light on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, you will learn how to reset the tyre pressure light on an Audi A3. Before performing the reset operation, ensure that any iss…
How to Reset the "Tyre Pressure" Light on an Audi A3
How to Reset the "Tyre Pressure" Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Before starting, sit in the driver's seat of your Audi A3 and activate the instrument panel by turning the key to the first position. Next, select th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos