Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cover of the external rearview mirror of the Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Side mirror

Today we will see the steps that will allow us to disassemble and replace the plastic cover of the external rearview mirror of the Audi A6. First of all, let's move to the exterior of the vehicle and start gently detaching the mirror glass, disconnecting the connector found on the back; then gently detach the plastic covers, unscrewing the internal screw, as shown in the video. At this point, we install the new mirror cover, finally fixing the glass and making the connection; finally, we adjust the angle of the mirror glass.

Posted on 10 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Audi A6
How to replace the external rearview mirror of the Audi A6
Audi A6 (2018-2026 / C8, MK 5) Today we will see the step-by-step instructions that will allow us to disassemble and replace the external rearview mirror of the Audi A6. First, we …
Removing the Exterior Mirror of an Audi A6
Removing the Exterior Mirror of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) In this video tutorial, follow the instructions to remove the exterior mirror of an Audi A6. First, fold the mirror forward and remove the glass by p…
How to disassemble the external rearview mirror in the Audi A5?
How to disassemble the external rearview mirror in the Audi A5?
Audi A6 (1997-2004 / MK 2, C5) In this tutorial, we can see how to disassemble the external rearview mirror in the Audi A6, an extremely simple and fast operation. First, we open t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos