Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Original Car Radio

Model: Audi A4 B7 - Years 2004-2008
Part: Car stereo

Using the appropriate four special tools that fit into the slots above and below the car radio to release the retaining springs, pull out the complete console and remove the electrical connectors to install the new kit.
Remove the screws from the dashboard panel that needs to be replaced with a new one suitable for housing the new radio. Install the removable support of the new radio and secure it by pressing the metal tabs outward. Adjust the radio's retaining springs to perfectly align the new trim. Connect the extensions included in the new radio kit to the original connectors and wire the radio carefully following the instructions included with the kit. Connect all new connectors at the back of the radio that you will position in the new housing, being careful not to pinch any wires. Turn on the radio and check the perfect operation of all the new features offered.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Original Radio with Aftermarket Model
Replacing Original Radio with Aftermarket Model
Audi A4 (1994-2000 / B5) To remove the original radio, you need the appropriate extraction keys. First, remove the trim around the center console, insert the keys into the sl…
Installation of Aftermarket Car Radio
Audi A4 (2004-2008 / B7) The first step is to attach the anchoring tabs to the new car radio using the appropriate pre-drilled bracket. Then, slide the car radio into the bra…
How to remove the car stereo of an Audi a4
How to remove the car stereo of an Audi a4
Audi A4 (2004-2008 / B7) How to disassemble the original car stereo of an Audi A4? Let's see carefully in this video how to perform the disassembly following the video. We us…

How to Remove the Interior Handle of a BMW 3 Series

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.

Watch the video!


by ScegliAuto

More videos