Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Dashboard on Audi A4

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Instrument cluster

See other generations:
Video tutorial

Remove the instrument cluster on Audi A4. Watch this video carefully to see how to proceed with the correct removal: remove the plastic trim of the instrument cluster cover (located underneath it), detach it from the dashboard, then, use a screwdriver to remove the securing screws located in the instrument cluster, pull the instrument cluster out from the dashboard, and disconnect its power cable.

Once the part is removed, install a new one or replace the LEDs/bulbs in the cluster and reinstall it. Finally, reverse the steps for the installation.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Replacing the Heater Core in an Audi A4
Replacing the Heater Core in an Audi A4
Audi A4 (1994-2000 / B5) This guide outlines the main steps to remove and replace the heater core in the cabin of an Audi A4. First, open the hood and disconnect the heater c…
How to Remove the Dashboard of the Audi A4?
How to Remove the Dashboard of the Audi A4?
Audi A4 (2014-2024 / B9) To remove the dashboard of the Audi A4, disconnect all the various trim pieces that make up the dashboard: start with the panel on the side near the …
How to Replace the Instrument Cluster on an Audi A4?
How to Replace the Instrument Cluster on an Audi A4?
Audi A4 (2007-2016 / B8) To replace the instrument cluster on an Audi A4, use a tool to pry off the trim that surrounds the instrument cluster. Once this trim is removed, you…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos