Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the sun visor hook and sun visor of the Audi A3

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Dashboard

To remove the hook that holds the sun visor of an Audi A3, start by moving the sun visor flap laterally, with a flathead screwdriver, release the hook protection; once the protection is removed, unscrew the two screws that hold the hook and then remove it; to reassemble it, you can follow the same procedure but in reverse. The same procedure can be followed to remove the sun visor: use a screwdriver to remove the protection covering the screw, once the screw is removed you can also remove the sun visor and follow the reverse procedure to reassemble it. The same procedure can be followed for the other side.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to install the towbar on the Audi A3 Sportback
How to install the towbar on the Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) To install the towbar on an Audi A3 Sportback we start by removing the rear lights (external headlights), we remove the rear bumper and the rear long…
How to remove the air conditioning controls on the Audi A3
How to remove the air conditioning controls on the Audi A3
Audi A3 Sportback (2003-2013 / MK 2) In this video tutorial we will see how to remove the automatic climate control control panel on an Audi A3, in simple and quick steps. First, let's g…
Replacing the Headlamp Bulb on an Audi A3
Replacing the Headlamp Bulb on an Audi A3
Audi A3 Sportback (2003-2013 / MK 2) In this video tutorial, you will learn how to remove and replace the front headlamp bulb on an Audi A3 Sportback. First, remove the wheel by lifting …

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos