Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the rear seats of the Audi A3 Sedan

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Checks and maintenance

Today we will see the instructions that will allow us to lower the backrests of the rear seats of the Audi A3, in Sedan version. First, we open the rear side doors of the car and start pulling the button next to the headrest, releasing the pin and thus being able to lower the backrests; it is possible to lower one third or two thirds of the rear backrests, as shown in the video. In this way, with the backrests lowered, we will significantly increase the cargo volume of the trunk; finally, we put the backrests back in their original position, hooking them perfectly!

Posted on 4 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Audi A3
How to remove the rear seats of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) The following steps will illustrate the process of disassembling and replacing the rear seats of the Audi A3, following the instructions below. First…
How to remove the rear seats of the Audi A3
How to remove the rear seats of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will see the main instructions useful for disassembling the rear seats of the Audi A3, but also of the Volkswagen Golf. First, we open the r…
How to Remove the Rear Seats from Audi A3
How to Remove the Rear Seats from Audi A3
Audi A3 (2003-2013 / MK 2, 8P) The following steps will show you how to remove and replace the rear seats from an Audi A3, following the instructions below. First, open the rear do…

    Frequently Asked Questions

    • A3 2012-2019 - How to remove the armrest of an Audi A3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos