Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external mirrors of the Audi

Model: Audi Audi Various
Part: Side mirror

Video tutorial

The following video tutorial will explain how to remove the external rearview mirrors of the Audi A3, A4, and A5. The steps to remove the mirror are: - move the mirror glass to be able to insert a plastic tool suitable for removal; - disconnect the mirror connector; - unscrew the screws inside the mirror to remove the outer cover; - remove the mirror; Perform the same steps to remove the driver's side rearview mirror if necessary.

This operation is important not only when it is necessary to replace the mirror but also in case we need to remove the door.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

How to replace the timing belt on the Audi 2.0 TDi engine?
How to replace the timing belt on the Audi 2.0 TDi engine?
Audi Audi Various To replace the timing belt on the Audi 2.0 TDi engine, loosen the screws securing the front bumper of the car so that it can be removed to access the…
How to Remove the Steering Wheel Airbag from an Audi
How to Remove the Steering Wheel Airbag from an Audi
Audi Audi Various Today, I will explain how to remove the steering wheel airbag from an Audi vehicle. To perform this operation independently, you need to get inside t…
How do you reset the automatic transmission of Audis?
How do you reset the automatic transmission of Audis?
Audi Audi Various In order to reset the automatic gearbox of an Audi, you need to turn on the instrument panel by inserting the ignition key into the corresponding slo…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos