Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator of the 2016 Audi S6

Model: Audi Audi Various
Part: Service warning light

To complete the manual reset procedure of the service light of your 2016 Audi S6, simply follow the steps described step by step. First, reach the driver's seat and start the instrument panel, then shift your attention to the central infotainment system and the buttons located near the gear lever. Press the menu button and select "Car". Then select "Car system" and go to "Servicing & Checks". Scroll down by turning the appropriate dial and select "Reset oil change interval" to proceed with the manual reset of the light.

Posted on 2 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on an Audi vehicle
How to reset the service light on an Audi vehicle
Audi Audi Various The steps to reset the service light on the Audi are simple and quick to perform independently. The first step is to turn off the instrument panel, i…
How to reset the tire pressure light in an Audi?
How to reset the tire pressure light in an Audi?
Audi Audi Various In this tutorial we can see how to reset the tire pressure warning light in an Audi, an extremely simple and quick operation, to be done only once th…
How to reset the TPMS light on the Audi
How to reset the TPMS light on the Audi
Audi Audi Various The TPMS warning light reset, related to tire pressure on an Audi car, follows simple and quick steps to be carried out independently. To perform the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos