Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Front Bonnet on Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Body

How to open the front engine bonnet of your car? In this video, see how to perform maintenance on an Audi A2. In most cars, the front bonnet opens by pulling the lever located inside the car, as in our case. Open the car door (driver's side), pull the plastic lever located at the bottom left of the dashboard. Once the lever is pulled, move the lever under the bonnet (with your fingers) and lift the car's bonnet as shown in the video. To close the bonnet, simply drop it from a relatively low height to avoid damaging the car.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of Your Audi A2
How to Open the Bonnet of Your Audi A2
Audi A2 (1999-2005 / MK 1) Do you want to open the bonnet of your Audi A2 for maintenance? This guide shows you how to proceed. Open the central plastic grille with your hands.…
How to Open the Bonnet of the Audi A2
How to Open the Bonnet of the Audi A2
Audi A2 (1999-2005 / MK 1) The Audi A2 is certainly one of the first to achieve the city car objective: it is a 5-door model with truly compact dimensions and, thanks to the us…
How to Open the Bonnet of the Audi A2
How to Open the Bonnet of the Audi A2
Audi A2 (1999-2005 / MK 1) Opening the bonnet on this model of car is essentially a disassembly: with the lever located at the bottom left on the driver's side, you open the co…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos