Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Audi Q5 remote control.

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Key

In today's video, we will see how to replace the battery of the remote key for the Audi Q5. For this operation, no tools or software are needed. First, you need to remove the emergency key by pressing the release button located on the back of the key, while pulling the key downwards. After removing the emergency key, you will have access to the key's battery compartment. Use the lever to remove the battery and replace it. After replacing the battery, insert it back into its slot, and then reinsert the emergency key.

Posted on 2 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Remote Battery in an Audi Q5
How to Change the Remote Battery in an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) To change the remote battery in an Audi Q5, press the button to extract the key. Once the key is out, press the same button to remove the battery wit…
How to Replace the Key Fob Battery on an Audi Q5?
How to Replace the Key Fob Battery on an Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) It often drives you crazy trying to find out how to change the battery in your car's key fob. Audi has a battery replacement system for the key fob t…
How to Change the Key Battery on an Audi Q5
How to Change the Key Battery on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Let's see how to remove the battery from the remote key on an Audi Q5. Take the Audi key and press the button to release the metal key. Once extracte…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos