Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Key of an Audi Q5 and Change the Battery

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part: Key

To open the key of your Audi Q5, as shown in the video, it is very simple. Start by removing the metal key inside by pressing the two black buttons located on the side of the silver part. Once the key is removed, you will see two tabs, and as seen in the video, those tabs need to be pressed while simultaneously pulling out the tab that contains the battery. Pull out the tab and proceed to remove the old battery and replace it with a new one. Once done, carefully place the tab with the new battery back in place and close it.

Posted on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi Q5 remote control.
How to replace the battery of the Audi Q5 remote control.
Audi Q5 (2008-2017 / MK 1, 8R) The following video tutorial shows us the steps to replace the battery of the remote control of the Audi Q5 car. To replace the key battery, we need …
How to Change the Key Battery on an Audi Q5
How to Change the Key Battery on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Let's see how to remove the battery from the remote key on an Audi Q5. Take the Audi key and press the button to release the metal key. Once extracte…
How to Replace the Audi Q5 Key Fob Battery
How to Replace the Audi Q5 Key Fob Battery
Audi Q5 (2017-2025 / MK 2, 80A) To replace the battery in the Audi Q5 key fob, press the button on the chrome cover and remove it to access the internal key. Once the chrome cover a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos