Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to connect the wires of the rear camera to the blue connector of the MMI of an Audi A4 B8

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Accessory kit

See other generations:
Video tutorial

Regarding the connection of the rear camera on an Audi A4 B8, an entire video is dedicated to a particularly delicate part, which is the connection of the rear camera wires on the blue connector of the MMI. So we remove the MMI, and disconnect the blue connector, removing the plastic cover simply by levering in the notch with a small pointed object.

PINs 5 and 11 are empty: in PIN 5 we will insert the black cable, while in PIN 11 we will insert the yellow one, which is the video.

Cut the plug wire, and inside we will find three wires: the red one is not of interest to us, while we will need to reconnect the black and yellow wires. Now close the plug, and thread it behind the MMI.


Posted on 17 May 2025 by ScegliAuto


Related tutorials

How to Connect Your Phone to a 2012 Audi A4
How to Connect Your Phone to a 2012 Audi A4
Audi A4 (2007-2016 / B8) The Multi Media Interface (MMI) is an in-car user interface multimedia system developed and introduced by Audi. It consists of a single integrated in…
How to Replace the Interior Rearview Mirror on an Audi A4
How to Replace the Interior Rearview Mirror on an Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show you the procedure for removing and replacing the interior rearview mirror on an Audi A4. First, get inside the vehicle and st…
How to Replace the Outside Rearview Mirror on the Audi A4?
How to Replace the Outside Rearview Mirror on the Audi A4?
Audi A4 (2007-2016 / B8) To remove the outside rearview mirror on the Audi A4, use a tool like a screwdriver to pry the mirror glass from its housing inside the shell: once d…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos