Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Battery

Today we will explain how to replace the battery and enter the radio unlock PIN on an Audi A3 model 8P. To replace the vehicle's battery, it is necessary to open the front hood and remove the protective cover. Disconnect the negative terminal and then the positive terminal. Remove the battery and proceed with the replacement. Connect the positive terminal and then the negative terminal, close the cover and the hood. Get into the vehicle and unlock the radio by entering the PIN using the numeric keys. The radio code is available in the vehicle's instruction manual.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery of an Audi A3?
How to Change the Key Battery of an Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) Changing the remote key battery for the Audi A3 is very simple and can be done by anyone. As shown in the video, all you need is a flat tool to lever…
How to Replace the Battery on an Audi A3?
How to Replace the Battery on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the battery on an Audi A3, open the bonnet and access the components underneath. In the central part of the engine bay, just below the win…
How to Replace the Battery on an Audi A3
How to Replace the Battery on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In a few simple steps, we will see how to remove and replace the battery on an Audi A3. First, open the bonnet of the vehicle and start by removing t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos