Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the License Plate Light on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: License plate light

How to replace the license plate light on an Audi A4? Let's see in this video how to replace the damaged bulb: open the trunk hood, and using a screwdriver or plastic lever, remove the plastic light fixture located in the rear hatch of the vehicle. Once the light fixture is removed, pull out the bulb; install the new bulb (same size and voltage) into the socket and reattach the light fixture to the hatch. Repeat the same steps for the other light fixture and test the proper functioning of the bulbs.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2007-2016 / B8) To replace the license plate holder on an Audi A4, first loosen the bolts that secure the license plate to its mounting. This will allow you to compl…
Audi A4 (2007-2016 / B8) Remove the long black plastic trim covering the bottom of the license plate by simply pulling it off with your hands. This is the area where the deal…
Audi A4 (2007-2016 / B8) The following steps will show us how to disassemble and replace the front fog light bulb of the Audi A4. First, let's move to the front of the car an…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos