Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the position of the rear tailgate of the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

In order to reset the position of the rear hatch of the Audi A4, you need to open it using the button on the remote control, so that the hatch reaches the maximum height that is set. Once the hatch is locked, you will need to grab it and manually move it up or down according to your needs: when it is in the desired position, you will need to hold down the button located on the bottom of the hatch for a few seconds. By doing this, you will notice that the new position of the hatch will be recorded.

Posted on 30 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Trunk on Audi A4 with a Dead Battery
How to Open the Trunk on Audi A4 with a Dead Battery
Audi A4 (2007-2016 / B8) How to open the trunk of your Audi A4 if the key battery is dead or broken? Let's see how to open the rear hatch. Open the rear door of the car and r…
How to Remove the Rear Hatch Panel of the Audi A4 Avant
How to Remove the Rear Hatch Panel of the Audi A4 Avant
Audi A4 (2000-2004 / B6) Today, you will see in this video how to remove and replace the rear hatch panel of the Audi A4 Avant by following these simple steps. First, open th…
How to Replace the Rear Hatch Handle on an Audi A4 B9
How to Replace the Rear Hatch Handle on an Audi A4 B9
Audi A4 (2014-2024 / B9) In this video, see how to remove and replace the external handle of the rear hatch on an Audi A4 B9 by following these simple steps. First, open the …

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos