Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the reverse light bulb on an Audi A3 8V

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Tail light

In this video we can see how to replace the reverse light bulb on an Audi A3 8V: on this model, the headlight is divided into two halves, one part remains on the body of the car, while the other half is located on the tailgate that is lifted. Right in this location, we find the reverse light, on the left side. We lift it, and see that on the back of the headlight group, there is a small door. We open it using a lever, and here we disconnect the electrical connector, a very visible yellow color, and remove the reverse light bulb.

Posted on 19 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2003-2013 / MK 2, 8P) How do you replace a rear headlight bulb on an Audi A3? Let's see how to proceed in this video. This is a very simple operation; open the boot and ca…
Audi A3 (2012-2019 / 8V, MK 3) Today we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the Audi A3.…
Audi A3 (2012-2019 / 8V, MK 3) To remove the rear light of an Audi A3 model 8V, follow these steps: - open the boot; - remove the side cover; - unscrew the two Torx screws; - pull …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos