Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light in the Audi RS5?

Model: Audi A5 8W6 - Years 2018-2025
Part:

Resetting the tire pressure warning light in the Audi RS5, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have restored the correct pressure of each tire following the instructions in the manual. First of all, go inside the cabin, then insert the key and turn on the instrument panel. Press the "MENU" button on the central console, select "CAR", scroll the screen to the left and enter "Servicing & checks". At this point, all that's left to do is select "Tire pressure monitoring" and perform the reset using the "Store tire pressure" option.

Posted on 9 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Audi A5?
How to reset the tire pressure light in the Audi A5?
Audi A5 (2018-2025 / 8W6) In this tutorial, we can see how to reset the tire pressure warning light in the Audi A5, an extremely simple and quick operation, to be done only on…
How to replace the battery in the Audi RS5?
How to replace the battery in the Audi RS5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In this tutorial, we can see how to replace the battery in the Audi RS5, an extremely simple and fast operation. First of all, make sure that the key…
How to reset the tyre warning light in the Audi A5?
How to reset the tyre warning light in the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In this tutorial, see how to reset the tyre warning light in the Audi A5, a very simple and quick operation to perform only after restoring the corre…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos