Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Brake Pad Replacement

Model: Audi A4 B6 - Years 2000-2004
Part: Brake pads

Loosen the wheel nuts and lift the vehicle securely. Remove the wheel by unscrewing the bolts. Using a ratchet wrench, unscrew the two bolts of the caliper. Remove the return spring of the pads and then take out the retainers. Remove the worn brake pads by pulling them from their seat. Install the new pads, ensuring the correct orientation and placing the one with the electrical contacts facing inward. Reattach the caliper with the two bolts. Reinstall the wheel. Reset the position of the pistons by pushing them inward. Check the brake fluid level and ensure it is not at the minimum.

Updated on 3 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Brake Light on Audi A4 B7
How to Reset the Brake Light on Audi A4 B7
Audi A4 (2004-2008 / B7) In today's tutorial video, you will see a solution on how to reset the brake pad wear light on an Audi A4 B7. Before performing the operation, you mu…
Replacement of Rear Brake Discs and Brake Pads
Replacement of Rear Brake Discs and Brake Pads
Audi A4 (2000-2004 / B6) Lift the vehicle on a lift and remove the wheel corresponding to the repair area. Unscrew the fastening pins of the brake caliper located at the rear…
How to Replace the Rear Brake Pads on an Audi A4 B8
How to Replace the Rear Brake Pads on an Audi A4 B8
Audi A4 (2007-2016 / B8) In this video, see how to replace the rear brake pads on an Audi A4 B8: First, remove the cap from the brake fluid reservoir, then put the parking br…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos