Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on an Audi A3 2.0 TDI 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

In this video, we will see how to reset the service light of an Audi A3 1.0 TDI 8P. We locate the buttons for resetting the service lights on the instrument panel, which are usually the speedometer and the partial odometer. With the instrument panel turned off, we press and hold the button for the partial odometer (on the bottom right side of the panel). Without releasing the button, we turn on the instrument panel: the message "service oil" will appear. We release the button and then press it briefly. The light should reset and the display should show the message "service" followed by the new expiration date. Turn off and on the instrument panel to verify that the light has turned off.

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3 MK4
How to Reset the Service Light on an Audi A3 MK4
Audi A3 (2020-2026 / 8Y, MK 4) Here we see how to reset the service light on an Audi A3 MK4 that uses the MIB3 multimedia system with a touchscreen. Turn on the instrument panel an…
How to Reset the Service Light on an Audi A3
How to Reset the Service Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To reset the service light on the Audi A3, first get in the vehicle and close all four doors. Turn on the ignition. You will see the service inspecti…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) After changing the engine oil and oil filter, it will be necessary to reset the service light; let's see the procedure for resetting the maintenance …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos