Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to resolve the safe mode on Audi vehicles

Model: Audi Audi Various
Part: Onboard computer

Today we will explain how to remove the safe mode on an Audi vehicle. Safe mode is activated when the vehicle's battery is completely drained. To remove safe mode, we must charge the vehicle's battery for at least 20 minutes; while the battery is charging, we get into the car and start the instrument panel, turn off and restart the ignition for a moment. Then we press the clutch pedal and start the vehicle, and the safe mode is deactivated. Disconnect the battery from the emergency charge and hit the road.

Posted on 9 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure of Audi vehicles
Resetting the tire pressure of Audi vehicles
Audi Audi Various If the pressure of one or more tires of Audi vehicles drops, the sensors mounted on the inflation valves signal this anomaly with a message on the in…
Replacing Rear Brake Pads with Electric Handbrake on Audi Vehicles
Replacing Rear Brake Pads with Electric Handbrake on Audi Vehicles
Audi Audi Various To replace the rear brake pads on an Audi vehicle equipped with an electric handbrake that locks the rear caliper, it is necessary to unlock the brak…
How do adaptive headlights work on Audi vehicles?
How do adaptive headlights work on Audi vehicles?
Audi Audi Various The adaptive headlights on new Audis provide maximum visibility and illumination in any external lighting condition: when the adaptive headlights are…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos