Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse positioning and diagram of the Audi TT

Model: Audi Tt MK 3, 8S - Years 2014-2023
Part: Fuse box

In this guide, we will see the information related to the positioning and layout of the fuse boxes of the Audi TT. First, we open the car's engine hood and start removing the plastic cover found on the right side of the engine compartment, thus accessing the fuse box; we open the front driver's side door and remove the plastic cover located next to the turn signal switch to access the internal fuse box, as shown in the video. In the vehicle's user manual, we will find the layout and diagram of the fuses, where we will find all the codes and amperages.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box Diagram for the Audi TT
Fuse Box Diagram for the Audi TT
Audi Tt (1998-2006 / 8N, MK 1) This guide will show you how to locate the internal fuse box of the Audi TT and find the fuse diagram. First, open the front door and start removing …
Fuse diagram and layout of the Audi TT
Fuse diagram and layout of the Audi TT
Audi Tt (2006-2014 / MK 2, 8J) In this short guide, we will see the instructions that will allow us to access the fuse boxes of the Audi TT. First, we get on board the car and star…
Where is the fuse box of the Audi TT located?
Where is the fuse box of the Audi TT located?
Audi Tt (2006-2014 / MK 2, 8J) Unlike other Audi models, the Audi TT has two fuse boxes inside. The first fuse box is installed in the trunk, specifically on the right side behind …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos