Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light Cluster from an Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Tail light

To replace the rear light cluster on an Audi A3, first open the tailgate of the boot. Once done, locate a slot on the side of the light to be removed, corresponding to the position of the light itself, where you will find the bolt securing the light in place (as illustrated in the images). Using the appropriate spanner, unscrew the bolt and remove the rear light cluster from its housing. Before completely detaching it from the car, disconnect the electrical connector. After this, you can remove the plastic block containing the bulb holders by unlocking the 4 clips that hold it in place. This way, you will have access to the bulbs, which you can then replace if necessary.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the rear taillight of the Audi A3
How to change the rear taillight of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In these short and simple steps, we will see how to disassemble and replace the rear light of the Audi A3, following the instructions below. First, w…
How to Remove the Rear Light on an Audi A3 S3 and RS3
How to Remove the Rear Light on an Audi A3 S3 and RS3
Audi A3 (2012-2019 / 8V, MK 3) This guide shows how to remove the rear light on an Audi A3, both in S3 and RS3 versions. The first operation is to open the boot and remove the trim…
Removing the Rear Light of the Audi A3
Removing the Rear Light of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today, in this brief guide, follow the main steps to remove and replace the rear light of the Audi A3. First, open the boot lid and start by unscrewi…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos