Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of an Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Key

How do you replace the dead battery in the key fob of an Audi A4? Let's see in this detailed video how to do it. Take your ignition key fob and remove the metal key; once the metal key is removed, use a small screwdriver to extract the battery holder (made of plastic) from inside. Remove the worn-out battery and take a new one of the same type, then replace it. Reassemble the battery holder in the key fob by pressing on the key case until you hear it click into place (insert the metal key). Check that the key functions correctly.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Key Fob Battery on Audi A4 B6
Replace the Key Fob Battery on Audi A4 B6
Audi A4 (2000-2004 / B6) Let's go through the steps to disassemble and replace the key fob battery on the Audi A4 B6, second generation, in simple and quick steps. First, tak…
How to Replace the Key Fob Battery in an Audi A4?
How to Replace the Key Fob Battery in an Audi A4?
Audi A4 (2014-2024 / B9) To replace the key fob battery in an Audi A4, use a tool as a lever to lift the cover on the front of the fob, located just below the manufacturer's …
How to Replace the Key Fob Battery for the Audi A4 B5?
How to Replace the Key Fob Battery for the Audi A4 B5?
Audi A4 (1994-2000 / B5) To replace the key fob battery for the Audi A4 B5, pry open the small grooves located on the upper side of the device. This will allow you to separat…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos