Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove Audi Q7 handle

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Handle

Do you want to replace the outside handle (passenger side) on the Audi Q7? In this video we see briefly how to disassemble and remove it from the door housing. In order to remove the lock, we need a screwdriver, let's see how to proceed: unscrew the screw on the side of the door with the screwdriver (remove the cover cap), remove the left part of the handle, then slide the handle to left of the door. We remove the door opening handle and insert the new piece into the door. Finally we hook the handle and tighten it with the appropriate screwdriver.

Posted on 14 November 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace the door handle of an Audi Q7
How to replace the door handle of an Audi Q7
Audi Q7 (2006-2015 / 4L, MK 1) Let's see how to remove the right outside handle (passenger side) on Audi Q7? In this detailed video we see briefly how to disassemble and remove it …
How do you remove the exterior handle of the Audi Q7?
How do you remove the exterior handle of the Audi Q7?
Audi Q7 (2006-2015 / 4L, MK 1) To remove the external handle of the Audi Q7, you need to use a tool to lever off the circular cover located on the side of the door. Underneath this…
How to Remove the Rear Door Handle on Audi Q7
Audi Q7 (2006-2015 / 4L, MK 1) If you need to remove the external handle attached to the door, you do not need to remove the door panel; you must use a special tool that allows you…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos