Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handle on an Audi Q7

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Handle

Let's see how to remove the right exterior door handle (passenger side) on an Audi Q7. In this detailed video, we briefly show how to disassemble it and remove it from the door housing. To remove the lock, you need a screwdriver; unscrew the screw located on the side of the door (as shown in the video), remove the left cover of the handle, then slide the handle to the left of the door. Remove the door opening handle and insert the new piece into the door. Finally, attach the handle and tighten it with the appropriate screwdriver. Test the handle.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Outer Handle of the Audi Q7?
How to Remove the Outer Handle of the Audi Q7?
Audi Q7 (2006-2015 / 4L, MK 1) To remove the outer handle of the Audi Q7, pry off the circular cover located on the side of the door using a tool. Under this small cover, you will …
How to Remove Audi Q7 Door Handle
How to Remove Audi Q7 Door Handle
Audi Q7 (2006-2015 / 4L, MK 1) Do you want to replace the outer handle (passenger side) on your Audi Q7? In this video, we will briefly see how to remove it from the door housing. …
How to Remove the Rear Door Handle on Audi Q7
Audi Q7 (2006-2015 / 4L, MK 1) If you need to remove the external handle attached to the door, you do not need to remove the door panel; you must use a special tool that allows you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos