Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Service warning light

It will be possible to completely remove the Service light shown on the instrument panel of the Audi A3 by inserting the key into the ignition so that the instrument panel is activated. Now you need to press the button located immediately below the speedometer, to the right of the small central display on the panel. By holding down this button, you will be able to reset both the maintenance intervals and the oil change intervals. Once they have been reset, you can turn the key, turning off the instrument panel and completing the procedure.

Posted on 20 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on an Audi A3 8P
How to reset the service light on an Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this article, we will see how to reset the service light on the Audi A3 8P. To reset the light, first, turn on the instrument panel without starti…
How to Reset the Service Light on Audi A3?
How to Reset the Service Light on Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) From the instrument cluster of the Audi A3, you can completely clear the Service light by activating the display, turning the ignition key in the cor…
How do you reset the Service light on an Audi A3?
How do you reset the Service light on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) It will be possible to completely make the Service light disappear that appears on the instrument cluster of the Audi A3 by turning on the instrument…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos