Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Audi A6?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Service warning light

From the instrument panel of the Audi A6, it is possible to completely turn off the Service light that illuminates when turning on the instrument panel and subsequently the engine, by inserting the ignition key into the appropriate slot and pressing the designated button. At this point, you can proceed by pressing the CAR button located on the central tunnel of the vehicle: doing so will display a message on the central screen asking if you really want to reset the maintenance interval. By choosing "Yes," the Service light will completely disappear from the instrument panel, allowing you to then turn it off.

Posted on 24 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Audi A6?
How do you reset the Service light on the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) In order to reset the Service light of the Audi A6, you must turn on the instrument panel and then start the engine, inserting the ignition key into …
How do you reset the Service indicator in the Audi A6 C6?
How do you reset the Service indicator in the Audi A6 C6?
Audi A6 (2004-2012 / MK 3, C6) Here is shown, in the video above, the way in which we can reset the Service light of the Audi A6 C6. It is very easy, especially because there is no…
How to Reset the Oil Light on a 2019 Audi A6
How to Reset the Oil Light on a 2019 Audi A6
Audi A6 (2018-2026 / C8, MK 5) Today, reset the maintenance reminder or service light on a 2019 Audi A6 when the "oil change" message appears. To reset the service light, turn on t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos