Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove, Install, and Adjust the Headrests on the Audi A4 B9

Model: Audi A4 B9 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

Here’s how to remove, install, and adjust the front headrests on the Audi A4 B9: To raise and lower the headrest, press the side button located at the base of the support on the side of the seat, and while holding it down, move the headrest up or down.

Release the button when you reach the desired height.

If you need to completely remove the headrest, you will need the emergency key (the one contained in the remote). Remove it and insert it into the side slots located at the base of the headrest supports (there are holes or small indentations on both sides).

By inserting the key into both sides, you unlock the catches. While holding the mechanisms unlocked with the key, lift the headrest up until it is completely removed.

For reinstallation, insert the two metal rods into the holes on the seat and push down until you hear a "click" indicating that it is locked.


Posted on 26 March 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) Today, you will learn how to remove the headrests and rear seats of the Audi A4. This procedure applies to the B6 and B7 models and can be done indep…
Audi A4 (2014-2024 / B9) Today, you will learn how to remove the headrests from the front seats of a 2016 Audi A4 B9. To start the removal, insert a flathead screwdriver into…
Audi A4 (2007-2016 / B8) With the help of the following video tutorial, we will illustrate the steps to remove the headrests of the front seats of the Audi A4 car. Unlike the…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos